Wet Oxidation: A Pre-Treatment Procedure for Sludge

Abstract

Wet oxidation process is specially effective for wastes with a high organic matter which can not be removed by conventional treatment methods. The digested and raw activated sludges of PAKMAYA yeast factory are treated by wet oxidation process. The liquid-phase organic matter concentration [as total organic carbon (TOC)] was increased by 16.5% in 10 min during the wet oxidation in the presence of Cu as catalyst and H<inf>2</inf>O<inf>2</inf>. Lenghtening the period of the wet oxidation, the TOC-concentration was increased by 66% in 120 min. The biodegradability of the sludge after wet oxidation process was also examined. A very little development in the biodegradability was observed, when wet oxidation was applied as pre-treatment to the digested sludge (5% decrease as TOC, in the presence of Cu catalyst and H<inf>2</inf>O<inf>2</inf>). However, in the case of digestion of the raw sludge after the application of wet oxidation, the biodegradability increased significantly (approximately 75%, as TOC). Moreover, wet oxidation improved the ability of settling of sludge solids, as well as enhancing the treatment efficiency. Finally, the volume of settled solids was decreased by 80% in the presence of Cu and H<inf>2</inf>O<inf>2</inf>. NH<inf>3</inf>+-N, NO<inf>2</inf>--N and NO<inf>3</inf>--N concentrations in the supernatant decreased with the wet oxidation. pH value of the sludge increased from 6.6 to 7.8-8.0. Since stable sludge was taken from the digester where the nitrification process was progressing, a decrease in the nitrite concentration, with an increase in nitrate was observed in the digestion continuing after the wet oxidation pre-treatment. However, in the raw activated sludge, there was a nitrite formation only in the non-pretreated sludge. © 2002 Elsevier Science Ltd. All rights reserved.